clear

Sign In

your password
check_boxKeep me signed in

Can't access your account? | Register

placeU1, 21 Groves Ave
McGraths Hill NSW 2756
phone1300 668 405
assignment_indRegister
shopping_cart
Untitled
Untitled
Untitled

BROWSEchevron_rightELECTRICIANSchevron_rightTEST

fullscreen fullscreen_exit done_all launch
  • Priceexpand_less
  • min$0
  • max$900
Cabac Digital Clamp Meter Open Jaw 200A AC T2600
zoom_in
Cabac Digital Clamp Meter Open Jaw 200A AC Generic
$155.95
T2600
check_box_outline_blank
  • A handy instrument for quick AC current measurement to 200 Amp and various digital multimeter functions. The casing is designed for easy use and storage of the test leads. The meter has a number of extra features of AC/DC voltage, capacitance, frequency, duty cycle, continuity, diode test and incorporates auto or manual ranges. A LCD backlight assists reading in low light areas. It has more features like relative measurements, and data hold.

    3¾ digit 3999 count display
  • Easy one hand operating
  • Lead holders
  • AC/DC voltage, capacitance, resistance with continuity
  • Diode test, frequency, and duty cycle
  • Relative and data hold
  • Back light
  • Open 12mm jaw
  • Battery Low
  • APO in 30min
      Special price while stocks last !!                

                       WAS $275.00 !!

                    NOW $145.00 !!

    Cabac General Purpose Digital Multi Meter BM251
    zoom_in
    Cabac General Purpose Digital Multi Meter Generic
    $144.95
    BM251
    check_box_outline_blank

    An economical unit with a perfect balance of price and performance. A good general purpose unit which has most functions needed for daily use by a contractor. The instrument has many advanced features, such as auto ranging, data hold, auto power off and a high level of protection, to guard against accidental damage.

    Beep-Jack™ Input Warning, beeps as well as displays \"InEr\" to warn the user against possible damage to the meter due to improper connections to the μA, mA, or A input jacks!

    • Electric Field Detection
    • Data Hold
    • 3 5/6 digit 6000 count LCD
    • Splashproof
    • PC-COMM Interface (optional)
    • Continuity & Diode Test
    • Compact Case
    • Beep-Jack™ Input Warning

                                    

      Cabac Professional Digital Multimeter BM821
      zoom_in
      Cabac Professional Digital Multimeter Generic
      $264.95
      BM821
      check_box_outline_blank

      This meter is the mainstay of the CABAC range of multimeters and is designed for use in heavy industry such as mining. Robust, dustproof and splash-proof, this meters has all the basic features a professional tradesman will require from a DMM. If you are looking for a reliable meter that will give many years of service then consider this excellent, rugged meter.

      • Dual Display
      • 1000V Protection
      • 9 9/10 Digital 10000 Count
      • Data Hold/Diode Tester
      • Beep-Jack™ Input Warning
      • Current Range Fused (600V HBC Fused)
      • Bargraph
      • USB Interface (optional)
                          

                       

        Cabac Professional DMM true RMS Data Logger ATSBM525
        zoom_in
        Cabac Professional DMM true RMS Data Logger Generic
        $609.85
        ATSBM525
        check_box_outline_blank

        A unique meter with all the features needed by a professional plus a recording capability, two control buttons for time select, stop, start, call back, pause, and up and down scrolling to log 43,500 readings for dual displays and 87,000 for single display. Has similar features to the BM822, plus a temperature range, AC+DC voltage, current, nS conductance.

        The USB optical interface and software allows downloading to or recording of data on a PC. This is a compact logger with a unique and easy to use feature for recording data such as voltage, temperature and current.

        • Dual displays
        • 1000V Protection
        • True RMS
        • Auto LoZ Volt & OHMs function selection
        • 9-9/10 Digital 10000 Count LCD
        • Backlit Display
        • 43,500 Point Data Logger for dual displays; 87,000 point Data Logger for single display
        • Bargraph
        • Beep-Jack™ Input Warning
        • The unique EF (Electric Field) detection, detects live voltage without touching!
        •   
                  Cabac Standard Autocheck Digital Multimeter TBM682
                  zoom_in
                  Cabac Standard Autocheck Digital Multimeter Generic
                  $154.95
                  TBM682
                  check_box_outline_blank

                  This meter is designed with a high degree of protection. With special features such as a sliding scale impedance relative to the test voltage known as AutocheckTM and 12 kV lightning surge (1.2/50ms) makes this a leading feature test instrument. The meters are double molded, easy to use, comfortable to hold and a safe and reliable tool for use in extremely rugged conditions. Choose from two meters a basic unit or a deluxe meter with extra features of range select, capacitance, diode test, continuity diode test.

                  Features: 

                  • 3 3/5 Digit 6000 Count
                  • CAT IV
                  • Updates 5 Times per Second                              
                  AutocheckTM V & Ω
                  • EF Detection
                  • APO Idle for 3 min
                  • Data hold

                  \"Aussie 

                  Digital Insulation Tester DMMS5201
                  zoom_in
                  Digital Insulation Tester Generic
                  $299.95
                  DMMS5201
                  check_box_outline_blank
                  •  3.5 Digits LCD Display.
                  •  1, 2, or 4 Minute Auto Test Lock.
                  •  Reads up to 2000M V.
                  •  Auto Zero function and Low Battery Indicator.
                  •  Auto Discharge when test button released.
                  •  Safety to IEC61010 Cat III 600V.
                  •  Manual Test with Alarm beeper and Light Flash for High Volts.
                  •  Audible continuity <50 ohms.
                  •  Size: 122 x 192 x 55mm. Weight: 545gms (not including plastic Moulded carry case).
                  •  Accessories Included are: Case, Test Leads, Clamp Leads, Screwdriver, Battery and Manual.
                  Hioki 3490 3 Range Analog HiTester 3490
                  zoom_in
                  Hioki 3490 3 Range Analog HiTester Generic
                  $299.95
                  3490
                  check_box_outline_blank
                  Insulation Testing in 3 Easy Steps, Flip the Cover, Select Range and Test
                  • 3-range testing voltage 250/500 V (Insulation meter up to 100 MΩ), and 1000 V (Insulation meter up to 4000 MΩ)
                  • Continuity check, 3 Ω range via 200 mA testing
                  • Bright LED luminous scale
                  • Check for live circuits and for the battery status
                  • Testing voltage250 V DC500 V DC1000 V DC
                    Rated resistance100 MΩ100 MΩ4000 MΩ
                    Accuracy
                    1st effective measuring range
                    ±5 % of indicated value
                    0.05 to 50 MΩ
                    ±5 % of indicated value
                    0.05 to 50 MΩ
                    ±5 % of indicated value
                    2 to 1000 MΩ
                    Lower limit resistance0.25 MΩ0.5 MΩ1 MΩ
                    (measurement resistance value to maintain testing voltage)
                    Overload protection1200 V AC (10 sec.)
                    Low resistance3 Ω (at 200 mA testing current), ±0.09 Ω accuracy
                    30 Ω (at 20 mA testing current), ±0.9 Ω accuracy,
                    Open-circuit voltage: 4.1 to 6.9 V
                    AC voltage measurement0 to 600 V (50/60 Hz), ±5 % of maximum scale value accuracy, 
                    100 kΩ or more input resistance
                    Other functionsBright LED luminous scale, Drop proof (on concrete, 1 m/1 time), Battery check, Live circuit check, Auto discharge
                    Power consumptionAA alkaline (LR6) battery × 4, Continuous use:
                    Dimensions, mass159 mm (6.26 in)W × 177 mm (6.97 in)H × 53 mm (2.09 in)D, 
                    610 g (21.5 oz), (including battery, not including test lead)
                    AccessoriesTest lead 9787 × 1, Operation manual × 1, Shoulder strap × 1, AA alkaline battery (LR6) × 4
                  Hioki 1000A Clamp Meter 600VAC/DC HIO3280-10
                  zoom_in
                  Hioki 1000A Clamp Meter 600VAC/DC Generic
                  $195.00
                  HIO3280-10
                  check_box_outline_blank
                  • 1000 A rms, clamp aperture: 33 mm(1.30 in) dia.
                  • Light 100 g(3.5 oz), and Slim 16 mm(0.63 in)
                  • Independent-opening double-lever design
                  • Slim body design, allows easy clamping even for narrow conductors
                  • No metal (iron core) exposure, ensuring enhanced safety
                  •  



                     
                  Hioki Volt Stick 3120 HIOKI3120
                  zoom_in
                  Hioki Volt Stick 3120 Generic
                  $54.95
                  HIOKI3120
                  check_box_outline_blank
                  Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3120 is a non-metallic contact voltage detector with a power switch that also gives a clear indication of the battery state with a green LED. When voltage is detected, the LED lights red along with an audio signal. CAT IV 1000 V 
                  Key Features • Top “primary supply level” safety class rating for voltage detectors • CAT IV 1000 V design meets CE Mark qualifications • Continuously indicate battery status with green indicator lamp • Both visual and audible voltage detection indication • Automatic power switching prevents battery discharge
                  Kyoritsu Clamp Meter Analogue AC 692608A
                  zoom_in
                  Kyoritsu Clamp Meter Analogue AC Generic
                  $175.00
                  692608A
                  check_box_outline_blank
                  DC voltage range is also available especially for checking emergency battery operated power supply.
                  Can measure temperature using optional probe.
                  Tear drop shaped transformer jaws for ease of use.

                   

                   

                  AC A6/15/60/150/300A ±3% of FS
                  AC V150/300/600V ±3% of FS
                  DC V60V ±3% of FS
                  Ω1/10kΩ (25/250Ω mid-scale)
                  |±2% of scale length
                  Temperature-20ºC~+150ºC (with the use of Temperature Probe 7060)
                  |±5ºC (0ºC~+100ºC)
                  |±10ºC (other ranges)
                  Conductor SizeØ33mm max.
                  Frequency Response50Hz/60Hz
                  Safety StandardIEC 61010-1 CAT.III 300V Pollution Degree 2
                  IEC 61010-2-031
                  IEC 61010-2-032
                  Withstand Voltage3700V AC for 1 minute
                  Power SourceR6P (AA) (1.5V) × 1
                  Dimensions193(L) × 78(W) × 39(D)mm
                  Weight275g approx.
                  Accessories7066A (Test leads)
                  8923 (Fuse [0.5A/600V]) × 2
                  9097 (Carrying case)
                  R6P (AA) × 1
                  Instruction Manual
                  Optional7060 (Temperature probe)
                  8008 (Multi-Tran)
                  Kyoritsu Digital Multimeter ATS691009
                  zoom_in
                  Kyoritsu Digital Multimeter Generic
                  $125.00
                  ATS691009
                  check_box_outline_blank
                  Display : 4000 counts.
                  Auto range and manual range selector provided.
                  (with range hold feature)
                  Resistance range provides audible continuity test.
                  Automatically turns power off in about 30 minutes to conserve battery life.
                  Direct current measurement up to 10A AC and DC.

                  With Holster.

                  DC V400mV/4/40/400/600V (Input Impedance 10MΩ)
                  |±0.6%rdg±4dgt (400mV/4/40/400V)
                  |±1.0%rdg±4dgt (600V)
                  AC V400mV/4/40/400/600V (Input Impedance 10MΩ)
                  |±1.6%rdg±4dgt (20~400mV)
                  |±1.3%rdg±4dgt (4/40V)
                  |±1.6%rdg±4dgt (400/600V)
                  DC A400/4000µA/40/400mA/4/10A
                  |±2.0%rdg±4dgt (400/4000µA)
                  |±1.0%rdg±4dgt (40/400mA)
                  |±1.6%rdg±4dgt (4/10A)
                  AC A400/4000µA/40/400mA/4/10A
                  |±2.6%rdg±4dgt (400/4000µA)
                  |±2.0%rdg±4dgt (40/400mA/4/10A)
                  Ω400Ω/4/40/400kΩ/4/40MΩ
                  |±1.0%rdg±4dgt (400Ω/4/40/400kΩ/4MΩ)
                  |±2.0%rdg±4dgt (40MΩ)
                  Continuity buzzer400Ω (Buzzer sounds below 70Ω)
                  Diode Test1.5V Release Voltage:Approx. 0.4mA Test Current
                  Capacitance Test40/400nF/4/40/100µF
                  Frequency5.12/51.2/512Hz/5.12/51.2/512kHz/5.12/10MHz
                  DUTY0.1~99.9% (Pulse width/Pulse period) ±2.5%±5dgt
                  Withstand VoltageAC 3700V / 1min.
                  Applicable standardsIEC 61010-1 CAT.III 300V
                  IEC 61010-2-031
                  IEC 61326
                  Power SourceR6P (1.5V) × 2
                  Dimensions155(L) × 75(W) × 33(D)mm
                  WeightApprox. 260g
                  Accessories7066A (Test leads)
                  8919 (Ceramic fuse [10A/600V])× 1
                  8923 (Fuse [0.5A/600V])× 1
                  R6P× 2
                  Instruction Manual

                   

                  Kyoritsu Kewmate 2000 KEWMATE2000
                  zoom_in
                  Kyoritsu Kewmate 2000 Generic
                  $249.95
                  KEWMATE2000
                  check_box_outline_blank
                  • Capable of measuring AC and DC current up to 60A with OPEN CLAMP SENSOR.
                  • 3400 counts with bargraph display.
                  • Pocket size and heavy duty design.
                  • Sleep function to save battery consumption.
                  • Designed to international safety standard IEC61010-1 CAT111 300v.

                   

                   

                   

                  Smart Meter TES-1800 LOOP / PSC Tester 0.01 W 3 Digit LCD Display Measure TES1800
                  zoom_in
                  Smart Meter TES-1800 LOOP / PSC Tester 0.01 W 3 Digit LCD Display Measure Generic
                  $295.00
                  TES1800
                  check_box_outline_blank

                  Large custom high contrast display. 
                  - Auto lock out if test resister overheats. 
                  - Voltage indication. 
                  - Measure low loop with 0.01 W resolution. 
                  - High loop range permit measurement of ground spikes. 
                  - Microprocessor controlled.

                   

                  Loop Impedance Range20 / 200 / 2000 W
                  Loop Impedance Accuracy+/- ( 2% + 2dgts ) at 1 W on 20 W Range
                  Lowest Resolution0.01 W
                  Voltage Display+/- 2% + 1digit
                  Ac Test Current25A nominal at 20 Range
                  Ac Test Period20ms
                  PSC Range200A / 2000A / 20KA
                  Operating Voltage230V +/- 10% , 50Hz +/- 1 %
                  Withstand Voltage3000V AC for 1 minute
                  Fuse ProtectionHRC ceramic fuse
                  Dimensions200(L) x 140(W) x 95(H)mm
                  WeightApprox. 900g
                  Display3 digit liquid crystal display with a maximum reading
                  of 1999.
                  Over Range Indication\" OL \" will be shown on the LCD
                  Penal when out of range measurement is made.
                  Operating Temperature and Humidity0 ℃ to 40 ℃ (32℉ to 104 ℉), Below 80% RH
                  Storage Temperature-10 ℃ to 60℃ (14 ℉ to 140 ℉)
                  Over Temperature\" OL \" on \" \"\" \" in display
                  AccessoriesTest Lead with IEC Connect
                  Smart Meter TES-1900 TES1900 Digital RCD Tester meter TES1900
                  zoom_in
                  Smart Meter TES-1900 TES1900 Digital RCD Tester meter Generic
                  $350.00
                  TES1900
                  check_box_outline_blank
                  Custom microprocessor controlled for 
                  highest accuracy and reliability. 
                  3 LED \'s for checking correct wiring status. 
                  0 and 180 degree phase angle switch 
                  permits quick tests and consistent readings. 
                  Digital read out of tripping time. 
                  Large custom digital display readout 
                  on all models. 
                  Visual indication of reversed phase and 
                  neutral wring at socket. 
                  Resilient case made from modern plastics 
                  to take everyday knock and brings.

                  Specification 

                  Rated Tripping Current 10 / 20 / 30 / 100 / 300 / 500mA 
                  Fault Condition Setting x1/2 , x1 , x5 
                  Fault Trip Time: 2000ms , 40ms (x5) 
                  Low Set Resolution: 1ms ( x1/2 , x1 ) , 0.1ms ( x5 ) 
                  Trip Time Accuracy : +/- (1% rdg + 2dgts) 
                  Operating Voltage : 230V +/- 10% , 50/60Hz 
                  Withstand Voltage : 3000V AC for 1 minute 
                  Operating Temperature and Humidity : 0oC to 40oC (32oF to 104oF), Below 80% RH 
                  Storage Temperature: -10oC to 60oC (14oF to 140oF) 
                  Accessories: Test Lead with IEC Connector.
                  Socket & See Wiring and Polarity Checker SOK32 SOK32
                  zoom_in
                  Socket & See Wiring and Polarity Checker SOK32 Generic
                  $49.95
                  SOK32
                  check_box_outline_blank

                  The Socket & See SOK32AU is the simple solution for mains wiring checking.

                  • Logical Green LED for GOOD
                  • Bright, easy to read LED\'s
                  • Clear Audible Indication
                  • Error free testing

                  Modern production methods ensure great performance and value. 
                  Tough, smooth contoured construction. Eye catching body colour, easy to find in a toolkit. Advanced electronic circuits mean positive & reliable indication. The testers are designed to give a quick & easy indication of correct wiring at the socket outlet. Particular emphasis is placed on detecting very dangerous wiring conditions such as reversed live earth connections & disconnected wires.

                  Features

                  • The first socket tester to show where the actual fault is - Live, Earth or Neutral
                  • New patented \'Fault Locate\' electronics gives clear indication of correct wiring plus 17 wiring fault conditions
                  • Continuous or strong warbling tone gives positive quick indication of faulty wiring
                  • Built-in self-check at start of testing gives confidence in correct operation at all times

                  Part No. SOK32AU

                  Test Lamp STL5 STL-5
                  zoom_in
                  Test Lamp STL5 Generic
                  $84.95
                  STL-5
                  check_box_outline_blank
                  STL5 LOW VOLTAGE TEST LAMP, FUSED 240/415V, CATIV 450V

                  Wattmaster 20Amp AC/DC Digital Mulitmeter ATSWATDMM9001
                  zoom_in
                  Wattmaster 20Amp AC/DC Digital Mulitmeter Generic
                  $149.95
                  ATSWATDMM9001
                  check_box_outline_blank
                • Hand held digital multimeter with ruggedised body for shock protection
                • Fuse protected for use up to 20A
                • Safety input jacks
                • Overload protection
                • Wrong input buzzer warning
                • Supplied with test leads, spare fuse and operating instructions

                • Specifications
                  Part No:WATDMM9001
                  Description:AC/DC Digital Multimeter
                  Display count:3 1/2 digit, 1999
                  AC volt:200mV, 2V, 20V, 200V, 750V
                  DC volt:200mV, 2V, 20V, 200V, 1000V
                  AC current:200µA, 2mA, 20mA, 200mA, 2A, 20A
                  DC current:200µA, 2mA, 20mA, 200mA, 2A, 20A
                  Resistance:200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ, 2000MΩ
                  Continuity:100Ω (audio visual)
                  Diode test:2V
                  Frequency:2kHz, 20kHz, 40kHz
                  Category rating:CAT III 1000V
                  Dimensions:198mm x 90mm x 44mm
                  Weight:400g (including batteries)
                  Wattmaster 400Amp AC Mini Digital Clamp Meter ATSWATDCM1046
                  zoom_in
                  Wattmaster 400Amp AC Mini Digital Clamp Meter Generic
                  $129.95
                  ATSWATDCM1046
                  check_box_outline_blank
                  Features
                • Clamp meter with non-contact voltage detection
                • True RMS and auto power off
                • Auto-ranging, overload protection and data hold function
                • Handy backlight for dim areas
                • Allows you to take temperature measurements up to 400°C
                • Max jaw opening size: 30mm
                • Overload protection
                • Supplied with test leads, carry case and operating instructions

                • Specifications
                  Part No:WATDCM1046
                  Description:Mini Digital Clamp Meter
                  Display count:3 3/4 digit, 3999
                  AC volt:4V, 40V, 400V, 600V
                  DC volt:4V, 40V, 400V, 600V
                  AC current:40A, 400A
                  Resistance:400Ω
                  Continuity:400Ω (audio visual)
                  Capacitance:4µF, 40µF, 400µF, 4mF
                  Temperature:K-Type thermocouple (-35°C to +400°C)
                  NCV indicator:24V-600V
                  Category rating:CAT III 600V, CAT III 300V
                  Dimensions:200mm x 65mm x 39mm
                  Weight:200g
                  Wattmaster All In One Multi-Purpose Cable Tester and Cable Tracer WATCBLTT
                  zoom_in
                  Wattmaster All In One Multi-Purpose Cable Tester and Cable Tracer Generic
                  $289.95
                  WATCBLTT
                  check_box_outline_blank

                  Multi-Purpose Cable Tester

                   

                  • An ideal tool which can test the correct pin configuation for different kinds of cables.
                  • For testing: RJ45/RJ11, BNC cable, USB, Multi-wire calbe, COAX
                  • Auto-scan and manual-check function
                  • Buzzer sound warning for wire status
                  • 2 LED module indicators on the master unit which can do both of transmitter and receiver functions for RJ45/RJ11 cable testing.  Users dont need to use the receiving unit
                  Cable Tracer
                  • The Amplifier Probe and Tone Generator are designed to identify and trace wires or cables within a group without damaging the insulation
                  • The flashlight function for easier cable trading in the dark
                  • An LED indication for the signal strength
                  • Volume control for increased sensitivity and adjustable to suit work environment
                  • Two bi-coloured LEDs for Line 1 and Line 2 indication of the polarities of the telephone lines
                  • Indentifying telephone line condition: Clear line, busy line and ringing line 

                   

                  Wattmaster Volt Stick Sound WATVS
                  zoom_in
                  Wattmaster Volt Stick Sound Generic
                  $29.95
                  WATVS
                  check_box_outline_blank
                  A non-contact instrument for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. Applying the tip of the Voltstick to the equipment area / cable to be tested, will result in the tip glowing red and the buzzer sounding when an AC voltage is detected.
                  • Locates breaks in cables
                  • Detects blown fuses
                  • Distinguish between live and neutral in single and three-phase supplies
                  • Identifies live cables in junction boxes etc.
                  • Checks the functionality of circuit-breakers and switches
                  • Tip illuminates red and the buzzer sounds to indicate a voltage
                  • Fully insulated and approved, for safe use


                  Product Specific Info For The Item Sold On This Listing

                  • Voltage Tester with Sound
                  • A non-contact instrument for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes, etc. Applying the tip of the Voltstick to the equipment area / cable to be tested, will result in the tip glowing red and the buzzer sounding when an AC voltage is detected.
                  • Locates breaks in cables
                  • Detects blown fuses
                  • Distinguish between live and neutral in single and three-phase supplies
                  • Identifies live cables in junction boxes etc.
                  • Checks the functionality of circuit-breakers and switches
                  • Tip illuminates red and the buzzer sounds to indicate a voltage
                  • Fully insulated and approved, for safe use

                   



                  Aegis CZ1000 Cable Tracer Finder CZ1000
                  zoom_in
                  Aegis CZ1000 Cable Tracer Finder AEGIS
                  $275.00
                  CZ1000
                  check_box_outline_blank
                  • The CZ1000 Cable Pair Identifier is an ideal tool that offers a simple solution for cable technicians when conducting cable pair identification in multi-pair cable, distribution boxes and tag strips.
                  • The CZ1000 is a modern Tone & Probe with a unique Plug and Use design feature.
                  Aegis CZ5000 Appliance Tester CZ5000
                  zoom_in
                  Aegis CZ5000 Appliance Tester AEGIS
                  $780.00
                  CZ5000
                  check_box_outline_blank

                  The CZ5000 Patrol is an easy-to-use Portable Appliance Tester, designed to meet the requirements of Australian / New Zealand Standard AS/NZS 3760:2003.

                  It will perform the essential electrical safety tests required for portable appliances and equipment, and can be used to test domestic appliances, industrial appliances, power tools, electrical portable outlet devices and extension leads.

                  The CZ5000 is a fully portable tester which can operate from internal alkaline batteries or from a 240V AC supply when present.

                  To operate you simply select the appliance type, either Class I, Class II, or Leads, and press the \"Start Test\" button. The Patrol automatically selects the appropriate test sequence of Earth Bond, Insulation Tests and Continuity/Polarity Tests. All pass and fail results are displayed at the end of the test.

                  The Patrol comes in a rugged drop-proof / weather-proof instrument case and is supplied with test adaptor leads and a set of tags to get you started.

                  Aegis CZ5001 Appliance Tester Patrol Pro CZ5001
                  zoom_in
                  Aegis CZ5001 Appliance Tester Patrol Pro AEGIS
                  $904.95
                  CZ5001
                  check_box_outline_blank

                  The CZ5001 Patrol Pro gives the flexibility of being able to test both standard and electronically switched Portable Appliances. It combines the famous Patrol battery powered portable appliance tester features with an earth leakage tester.

                  To operate, simply plug the appliance in to the earth leakage module which continuously measures the return current flowing through the earth conductor whilst the appliance is operating in a normal condition. The results are displayed on one of 4 LED indicators located at the top of the unit.

                  The Patrol Pro is supplied with test adaptor leads and a set of tags to get you
                  started.

                  Features of the CZ5001 Patrol Pro:

                  • The ultimate appliance tester
                  • Compatible with domestic appliances, industrial appliances, power tools, electrical portable outlet devices and extension leads
                  • Fully portable, mains or battery operated
                  • Light weight
                  • Single button test
                  • Pass/Fail results displayed at the end of the test
                  • Leakage results displayed during testing
                  • Built in self-check
                  • Comes in drop proof and waterproof case
                  • Test leads and probes included
                  • Pack of sample tags included
                  • Australian owned and designed

                   

                  Aegis Test Phone - Contractor (3-way lead) CZ20018 CZ20018
                  zoom_in
                  Aegis Test Phone - Contractor (3-way lead) CZ20018 AEGIS
                  $225.01
                  CZ20018
                  check_box_outline_blank

                  A buttset its the basic tool of the trade for anyone working on phone lines and is an essential tool to have in your toolbox. The Aegis range of test telephones are designed for use on all PSTN systems by line installers, repair technicians, and other tradespeople for phone line testing and monitoring. There is a model suitable for every application, from basic to advanced, meaning you can choose the butt set that is right for you.

                  The CZ20018 is the basic workhorse level buttinski with all the features required for most phone line testing. Further, the CZ20018 comes equipped with a multi-way lead set as standard meaning connection to Krone and RJ sockets are automatic. A high impedance monitor mode protects interruption to ADSL when monitoring the line.

                  You wont find better value for money than this !

                  Features:

                  • Data Safe
                  • Last Number Redial
                  • Talk/Monitor/Ringer modes
                  • Polarity indicating LED
                  • 10 phone number storage
                  • Water resistant
                  • Tone & Pulse Dial
                  • High Impedance Monitor
                  • Field replaceable line cord
                  • Durable belt clip
                  • Upgradable to Multi-way lead set